PKA A30KA4 & PUZ HA30NHA4 h2i Commercial Wall Heat Pump 16.5 SEER 30,000 BTU (2.5 Ton)

Or
As Low As :
$/Month
Based on a purchased price of
$
at 20% of APR for 12 months
Financing available.Choose your monthly payment options.Get your purchase today.
Click Here to Learn more.

Availability: In stock

$6,299.99

Price as configured: $6,299.99

Model #: PKA-A30KA4/PUZ-HA30NHA4
Brand : Mitsubishi

Availability: In stock

Mitsubishi PKA-A30KA4/PUZ-HA30NHA4 Highlights:



  • Wall Mounted System

  • Auto Vane Control

  • Heating and Cooling

  • Hot-start System

  • R410A Refrigerant

Free Shipping
Do you have any questions about PKA-A30KA4/PUZ-HA30NHA4?
CALL NOW: (800) 880-0199 EMAIL US
John
  • PRODUCT OVERVIEW
  • PRODUCT SPECIFICATIONS
  • CUSTOMER REVIEWS
  • Literature

Mitsubishi PKA A30KA4 & PUZ HA30NHA4 H2i Commercial Wall Heat Pump 16.5 SEER 30,000 BTU (2.5 Ton)

Select from a wall-mounted,hard-wired controller (PKA-HA/KA) for ultimate comfort control.The set-temperature display is large and easy to read.Using the 24-hour timer, you can get the unit operation to start and stop at specified times and to repeat daily.And the convenient remote provides easy control of the Fan Speed as well as the cool, heat, AUTO and Dry modes from anywhere in the room.The hand-held wireless remote controller is easier to use than most TV remotes for the PKA-HA(L)/KA(L).

Lightweight, Easy-to-install Indoor Unit

The smallest PKA unit measures about 36” wide, 11-1/2” tall and 9-3/4” deep. It weighs just 29 lbs., is easily installed above windows or doorways,and can typically be installed by just two licensed installers in about half of a day. And the PKA-Series models don’t even require ductwork,only a small three-inch opening in the wall or ceiling, so they can be installed in some of the toughest spaces, even on brick and masonry walls.

Mitsubishi PKA-A30KA4/PUZ-HA30NHA4  Auto Vane Control

With a simple press of the OFF button, the vane closes the air outlet for a clean presentation when not in use. During operation, the vane can be adjusted with the remote controller to the perfect position to direct the airflow horizontally in cooling mode or towards the floor in heating mode, keeping room temperature even and comfortable.

Mitsubishi System Technologies

Mitsubishi Electric delivers flexible and convenient cooling and heating solutions to almost any commercial, institutional or large residential application. Choose from small, quiet indoor and outdoor units that operate with the increased efficiency you need. Whether in a church, office building, school, nursing home, restaurant, retail store, or equipment room, the compact design of the indoor units make cooling and heating difficult spaces a breeze.

With wall-mounted, ceiling-recessed, ceiling-suspended and horizontal ducted options, capacities of up to 42,000 Btu/h of cooling or heating performance and Hyper-Heating INVERTER P-Series technology that provides 100 percent heating capacity down to 5Ëš F, Mitsubishi Electric systems have the perfect solution for almost any building.

Mitsubishi PKA-A30KA4/PUZ-HA30NHA4 Features:

  • INVERTER TECHNOLOGY - You can enjoy high-speed cooling and heating and consistent delivery of comfort year-round.
  • QUIET OPERATION - You can hold a board meeting or teach a class in quiet comfort.
  • EASY INSTALLATION - Installs quickly room by room with minimal interruption.
  • ZONE CONTROL - You can cool and heat only those spaces desired for maximum control and energy efficiency.
  • ADVANCED MICROPROCESSOR TECHNOLOGY - Built in electronics ensure efficient operation and maximum performance for optimum comfort.
  • LOW AMBIENT COOLING DOWN TO 0ËšF OUTDOORS (REQUIRES WIND BAFFLE) - This feature is perfect for computer network centers and telecom equipment rooms that need help to stay cool down to 0Ëš F outside.
  • ENVIRONMENTALLY FRIENDLY REFRIGERANT - Mitsubishi systems use R410A, an environmentally friendly refrigerant.

Flexible Control

Convenient and efficient zone control means you can cool or heat only the spaces in use.You can even have single or dual controllers connected to one system.The controller does not even have to be in the space shared with the indoor unit. Features of the controller include a weekly timer, temperature range limiting, auto-off,expanded fault codes, and service call number display.

Installation Service and Maintenance Ease

The units use only three polarity sensitive wires plus a ground conductor run from the outdoor to the indoor unit, providing both power and communication connections.Two non-polar wires connect the indoor unit and wall-mounted controller.This wiring design helps avoid installation errors. An optional wireless remote controller kit is available for the ceiling-mounted indoor units.

Mitsubishi outdoor units are designed with easy service and maintenance in mind. Maintenance points are located behind easy-access panels to make installation and service effortless for a trained technician. Four-way piping access allows connection in four directions: front, rear, right and bottom (all PUY/PUZ models).

Redi-charged Systems

Mitsubishi outdoor units come with enough refrigerant to be installed 70 feet (PUY(Z)12-36) and up to 100 feet (PUY(Z)42) from the indoor units. Linesets can be run up to 100 feet from PUY(Z)12-18 outdoor units and 165 feet from PUY(Z)24-42 outdoor units when additional charge is added.

Thanks to unique design profiles and R410A refrigerant,these systems are easier to fit into any space. R410A is environmentally friendly with zero Ozone Depletion Potential (ODP).

Hot-start System

Heat pump systems use our hot-start technology to provide warmth from the beginning by ramping up fan speed as the coil warms. When you want warm air without annoying drafts, that’s what you’ll get.

Low Ambient Operation (PUY/PUZ)

The ability of these units to operate effectively in low temperatures,along with the addition of a low-ambient wind baffle accessory, allows for a space to be air-conditioned even when it is as low as 0Ëš F outside. This cooling ability is important when dealing with electronic equipment rooms, telecom substations, surveillance mechanical rooms, restaurant kitchens, fitness centers and more.

Auto Fan Speed Feature (excludes PEA model)

Choose from multiple set fan speeds or auto fan speed to ensure faster achievement of room temperature.Auto fan speed mode allows the fan to adjust its speed based on the degree of differential between set-point and room temperature.

Innovative Compressor Technology

Located in the outdoor unit, INVERTER-driven compressor systems detect subtle changes in temperature and, like a car’s cruise control,automatically adjust compressor speed unlike conventional units,which start and stop repetitively.

Special components within the compressor increase the magnetic flux and reduce its weight allowing the compressor to generate higher energy efficiencies with the best in performance than ever at low levels of sound during start-up and running.

Extra Energy Savings

Six (6) Mitsubishi Hyper-Heating INVERTER (H2i®) P-Series systems are ENER GY STAR rated and One (1) system qualifies for the Economic Stimulus Tax Credit offered as part of the American Reinvestment and Recovery Act.

Easy-clean Filters

Convenient tabs let you remove the washable filters quickly and easily for faster cleaning in the PKA, PCA and PLA indoor units.You’ll also save time and money because you won’t need to replace the filters.

Auto Cooling/Heating Changeover

In Auto Mode our systems monitor and sense when a space needs cooling or heating and automatically switch operation as needed to maintain a consistent temperature within the selected range of a single zone.

Bring In Outside Air

Ducting can be installed with minimal on-site work to bring in outside air for PCA, PLA and PEA/D indoor units, creating a healthier indoor environment.

Mitsubishi PKA-A30KA4/PUZ-HA30NHA4 Ductless Mini Split System Residential Applications 

  • Sun rooms
  • Wine cellars
  • Guest quarters
  • Garage workshops
  • Homes without duct work
  • Bedrooms and family rooms
  • Room additions and renovations

Mitsubishi PKA-A30KA4/PUZ-HA30NHA4 Ductless Mini Split System Commercial Applications 

  • Storage facilities
  • Hotels and other lodging
  • Computer rooms/server rooms
  • Offices in warehouse spaces
  • Restaurant kitchen and prep areas
  • Buildings where security concerns prevent the use of window units
  • Internal areas without exterior wall access applications
  • Commercial add on jobs where the existing air conditioning system cannot be stretched.
  • Historical renovations or any application where preserving the look of the original structure is crucial.

Component Overview

  • H2i PUZ HA30NHA4 Commercial Ductless Outdoor Heat Pump 16.5 SEER 30,000 BTU (2.5 Ton)

    Mitsubishi H2i PUZ HA30NHA4 16.5 SEER 2.5 Ton Commercial Heating and Cooling Ductless System 30,000 BTU Outdoor Unit

    Mitsubishi PUZ-HA30NHA4 Hyper-heating INVERTER

    Bringing year-round comfort solutions to extreme climates.

    Unequaled Year-round Comfort from the PUZ-HA30NHA4

    The cooling and heating success of Mitsubishi Electric’s INVERTER-driven heat pump systems is well-documented. The Hyper-Heating INVERTER (H2i) PUZ-HA30NHA4 technology advances the process a step further with the added benefit of year-round comfort with a single system even on the coldest days of the year in most areas. The 2.5- and 3-ton wall-mounted, ceiling-suspended, ceilingcassette, and ducted indoor units connected to the H2i PUZ-HA30NHA4 outdoor units are flexible enough to satisfy almost any light commercial or institutional renovation or new construction project. Rugged construction assures cold weather reliability.

    Heating Performance at Low Temperatures

    The Hyper-Heating INVERTER system provides outstanding heating performance at extremely low temperatures while keeping effective energy usage at the forefront. See the impressive COP (Coefficient of Performance) values in the table the table to the right. The Mitsubishi H2i PUZ-HA30NHA4 systems are able to maximize efficiency at low temperatures while providing tremendous heating output.

    The Next Generation in Heat Pump Technology 

    These H2i PUZ-HA30NHA4 outdoor units give a new level of performance to Mitsubishi Electric P-Series models, providing the extra heat-generating power it takes to deliver comfort and consistency in extreme climates. H2i units use Mitsubishi Electric’s INVERTER-driven scroll compressor technology to achieve the desired room temperature quickly, maintaining it consistently while simultaneously conserving energy. Plus with the integration of the exclusive H2i flash technology, these H2i PUZ-HA30NHA4 units recover heat energy that is normally wasted in the flash process at the outdoor coil. This process helps the H2i system overcome issues commonly associated with conventional heat pumps such as decreases in lowside pressure, refrigerant mass flow rate, and operational capacity. As a result H2i

    PUZ-HA30NHA4 units deliver 100 percent of rated heating capacity at 5 F and 80 percent at -13 F outdoor ambient temperatures. (Without energy consuming electric resistance heaters.) Plus the systems use R410A environmentally friendly refrigerant. H2i P-Series heat pumps offer a variety of features designed to take the worry out of temperature control such as automatic restart in the case of power outages and automatic cool/heat changeover. Its long line-length capabilities of up to 245 ft. expand application possibilities. Sometimes cooling spaces such as computer or mechanical rooms and kitchens is necessary even when the temperature is below freezing. Air conditioning down to 0 F outdoor ambient temperature is possible with the addition of a wind baffle. Whether cooling or heating, the H2i PUZ-HA30NHA4 gives you the flexibility to temper extreme outdoor temperatures.

    Warm Air Quickly!

    At start-up, a special circuit in the H2i PUZ-HA30NHA4 quickly delivers refrigerant to the air-conditioning cycle, which rapidly increases the mass flow rate in the system. As a result, air at comfortable temperatures begins flowing from indoor units right away. Even at an outdoor temperature of -13 F, the H2i P-Series system can discharge 100 F temperature air from the indoor units. At 5F outdoor temperature and above, the discharge temperature reaches an impressive 110 F with a 40 F temperature rise. This feature translates into a comfortable climate in all zones whether cooling or heating no matter the temperature outside.

    Innovative Compressor Technology

    Mitsubishi's INVERTER-driven compressor systems in the outdoor unit detect subtle changes in temperature and, like a car’s cruise control, automatically adjust compressor speed – unlike conventional units, which start and stop repetitively. Special components within the compressor increase the magnetic flux and reduce its weight, allowing the compressor to generate higher energy efficiencies with better performance than ever before – at low levels of sound during start-up and running

    The Solution is Clear

    • Cool only the areas you want and not the areas where you are not
    • Individual zoning at the push of a button, putting you in total comfort control
    • Less then 5% cooling loss occurs in insulated refrigerant lines versus up to 40% through ducts
    • Requiring just a 3 to 4" diameter hole in the outside wall means less mess, better home aesthetics, and improved security, unlike a window unit
    • Mr. Slim models mount high on the wall so they don't disturb your view
    • Mitsubishi units add value to your home and are more efficient than old window units, saving you money

    The PUZ-HA30NHA4's Quiet Operation

    Do you hear that? No? You barely hear our systems because Mitsubishi indoor units operate with barely a whisper.

    For example:

    • Police siren 118 decibels
    • Circular saw 107 decibels
    • Vacuum cleaner 74 decibels
    • Library reading room 33 decibels
    • Whisper-tone voice 35 decibels
    • Our Indoor Units 19 - 34 decibels (at low speed)

    Did you hear that? We hope you did.

    Mitsubishi Offers System Control in the Palm of Your Hand

    Mitsubishi Electric offers a comprehensive remote controller that controls temperature, fan speed and more. Choose from four modes: COOL, HEAT, AUTO and DRY. The controller also has a 12-hour ON/OFF timer for one-button control of your personal comfort.

    Warm Air, No Drafts

    Our hot-start heat pump technology provides warmth from the beginning. The fan increases in speed as the coil is warmed, reducing drafts so when you want warm air, you’ll get it.

    The PUZ-HA30NHA4 is Easy to Maintain

    With easily accessible filters, little or no ductwork to clean, and uncomplicated wiring connection points between the indoor and outdoor units, Mitsubishi systems rely on minimal maintenance, providing another level of comfort.

     

     

  • PKA A30KA4 Wall Commercial Indoor Unit Air Handler 30,000 BTU (2.5 Ton)

    Mitsubishi PKA A30KA4 2.5 Ton Wall Mounted Ductless Heating / Air Conditioning System 30,000 BTU Indoor Unit

    The Mitsubishi PKA-A30KA4

    Select from a wall-mounted, hard-wired controller (PKA-HAL/KAL) for ultimate comfort control or a han-held wireless controller.

    The set-temperature display is large and easy to read. Using the 24-hour timer, you can get the unit operation to start and stop at specified times and to repeat daily. The convenient remote provides easy control of the Fan Speed as well as the cool, heat, AUTO, and Dry modes from anywhere in the room.

    The hand-held wireless remote controller is easier to use than most TV remotes for the Mitsubishi PKA-A30KA4

    Lightweight, Easy-to-install Indoor Unit

    The smallest PKA unit measures about 36” wide, 11-1/2” tall and 9-3/4” deep. It weighs just 29 lbs., is easily installed above windows or doorways, and can typically be installed by just two licensed installers in about a half day. The wall-mounted models don’t require ductwork, only a small three-inch opening in the wall or ceiling so they can be installed in some of the toughest spaces, even on brick and masonry walls.

    The Mitsubishi PKA-A30KA4's Auto Vane Control

    During operation, the vane can be adjusted with the remote controller to the perfect position to direct the airflow horizontally in cooling mode or towards the floor in heating mode, keeping room temperature even and comfortable. With a simple press of the OFF button, the vane closes the air outlet for a clean presentation when not in use.

    Mitsubishi PKA-A30KA4 Features:

    • Wall-mounted indoor unit for residential and commercial applications
    • Shiny-white–exterior plastic; compact design
    • Quiet operation—both indoor and outdoor units
    • Self-check function—integrated diagnostics
    • Limited warranty: five years on parts and defects and seven years on compressors

    The Solution is Clear

    • Cool only the areas you want and not the areas where you are not
    • Individual zoning at the push of a button, putting you in total comfort control
    • Less then 5% cooling loss occurs in insulated refrigerant lines versus up to 40% through ducts
    • Requiring just a 3 to 4" diameter hole in the outside wall means less mess, better home aesthetics, and improved security, unlike a window unit
    • Mr. Slim models mount high on the wall so they don't disturb your view
    • Mitsubishi units add value to your home and are more efficient than old window units, saving you money

    Mitsubishi PKA-A30KA4's Quiet Operation

    Do you hear that? No? You barely hear our systems because Mitsubishi indoor units operate with barely a whisper.

    For example:

    • Police siren 118 decibels
    • Circular saw 107 decibels
    • Vacuum cleaner 74 decibels
    • Library reading room 33 decibels
    • Whisper-tone voice 35 decibels
    • Our Indoor Units 19 - 34 decibels (at low speed)

    Did you hear that? We hope you did.

    Mitsubishi Offers System Control in the Palm of Your Hand

    Mitsubishi Electric offers a comprehensive remote controller that controls temperature, fan speed and more. Choose from four modes: COOL, HEAT, AUTO and DRY. The controller also has a 12-hour ON/OFF timer for one-button control of your personal comfort.

    Warm Air, No Drafts

    Our hot-start heat pump technology provides warmth from the beginning. The fan increases in speed as the coil is warmed, reducing drafts so when you want warm air, you’ll get it.

    The Mitsubishi PKA-A30KA4 is Easy to Maintain

    With easily accessible filters, little or no ductwork to clean, and uncomplicated wiring connection points between the indoor and outdoor units, Mitsubishi systems rely on minimal maintenance, providing another level of comfort.

    Multiple Filters for Cleaner, Healthier Air

    Mitsubishi indoor units use a sophisticated multi-part filter system to remove contaminants such as allergens, viruses and bacteria from the air as it circulates.

    The hybrid catechin pre-filter absorbs odorcausing gases. A Blue-Enzyme anti-allergen filter reduces germs, bacteria and viruses and helps trap dust, pollens, mites and other particles; the filter uses an enzyme catalyst to help break down the sulfur atom bonds in allergen proteins, transforming them into non-allergen proteins.

    A hybrid-coating process makes the catechin filter washable and, if properly maintained with monthly cleanings, effective for more than 10 years.

Additional Information

SKU/MODEL PKA-A30KA4/PUZ-HA30NHA4
Brand Mitsubishi
Mounting Type Wall Mounted
Outdoor Unit Type Heat Pump
SEER Rating 16 SEER
Zone 1 Zone
Application heating and cooling
Cooling Capacity 30,000
Heating Capacity 34,000
Lowest Operating Temperature (Cooling) No
Lowest Operating Temperature (Heating) No
Cooling Range No
Heating Range No
Rated Capacity No
amperage(amp0 No
Decibels (outdoor) No
Decibels high/med/low/quiet (indoor) No
Dimensions (indoor) (H x W x D) No
Dimensions (outdoor) (H x W x D) No
liquid_line_connection_size No
Suction Line Connection Size No
Moisture Removal (Indoor) No
Weight (Indoor) No
Weight (Outdoor) No
Inverter technology No
Energy Star Rated No
Auto Restart No
Sleep Timer No
Air Filter No
Warranty No