Mitsubishi PLA-A12BA4 & PUY-A12NHA4 Ceiling Cassette Commercial Air Conditioner 13.5 SEER 12,000 BTU (1 Ton)

Mitsubishi Mr. Slim PLA-A12BA4 & PUY-A12NHA4 12,000 BTU 13.5 SEER Ceiling Cassette Ductless Cooling System

Wider Air Stream

Longer air outlets deliver wider air streams for improved air distribution and energy savings. This feature means quieter air delivery with fewer drafts and great overall cooling and heating coverage.

i-see™ Sensor Optional Accessory

In addition to the return air temperature, the PLA-A**BA four-way ceiling cassette with the field-installed i-see sensor measures the floor temperature in real time,observing the room vertically for better management of sensible temperature (temperature felt by the occupant). The i-see sensor measures the infrared rays generated from the surrounding wall and floor surface at an angle of 360°.The infrared ray energy is converted into a temperature value. The i-see sensor rotates 90° slowly in five-second intervals for correct measurement of temperature to cover the full floor space. When combined with the auto fan speed mode, air can be directed to the farthest corners of the room for enhanced temperature coverage.

Independent Vane Motor Control

Each of the four vanes can be set by the wired remote controller to operate independently to match the room layout. Specific vane settings include five fixed directions plus swing.

Mitsubishi System Technologies

Mitsubishi Electric delivers flexible and convenient cooling and heating solutions to almost any commercial, institutional or large residential application. Choose from small, quiet indoor and outdoor units that operate with the increased efficiency you need. Whether in a church, office building, school, nursing home, restaurant, retail store, or equipment room, the compact design of the indoor units make cooling and heating difficult spaces a breeze.

With wall-mounted, ceiling-recessed, ceiling-suspended and horizontal ducted options, capacities of up to 42,000 Btu/h of cooling or heating performance and Hyper-Heating INVERTER P-Series technology that provides 100 percent heating capacity down to 5Ëš F, Mitsubishi Electric systems have the perfect solution for almost any building.

FEATURES :

• INVERTER TECHNOLOGY - You can enjoy high-speed cooling and heating and consistent delivery of comfort year-round.

• QUIET OPERATION - You can hold a board meeting or teach a class in quiet comfort.

• EASY INSTALLATION - Installs quickly room by room with minimal interruption.

• ZONE CONTROL - You can cool and heat only those spaces desired for maximum control and energy efficiency.

• ADVANCED MICROPROCESSOR TECHNOLOGY - Built in electronics ensure efficient operation and maximum performance for optimum comfort.

• LOW AMBIENT COOLING DOWN TO 0ËšF OUTDOORS (REQUIRES WIND BAFFLE) - This feature is perfect for computer network centers and telecom equipment rooms that need help to stay cool down to 0Ëš F outside.

• ENVIRONMENTALLY FRIENDLY REFRIGERANT - Mitsubishi systems use R410A, an environmentally friendly refrigerant.

Flexible Control

Convenient and efficient zone control means you can cool or heat only the spaces in use.You can even have single or dual controllers connected to one system.The controller does not even have to be in the space shared with the indoor unit. Features of the controller include a weekly timer, temperature range limiting, auto-off,expanded fault codes, and service call number display.

Installation Service and Maintenance Ease

The units use only three polarity sensitive wires plus a ground conductor run from the outdoor to the indoor unit, providing both power and communication connections.Two non-polar wires connect the indoor unit and wall-mounted controller.This wiring design helps avoid installation errors. An optional wireless remote controller kit is available for the ceiling-mounted indoor units.

Mitsubishi outdoor units are designed with easy service and maintenance in mind. Maintenance points are located behind easy-access panels to make installation and service effortless for a trained technician. Four-way piping access allows connection in four directions: front, rear, right and bottom (all PUY/PUZ models).

Redi-charged Systems

Mitsubishi outdoor units come with enough refrigerant to be installed 70 feet (PUY(Z)12-36) and up to 100 feet (PUY(Z)42) from the indoor units. Linesets can be run up to 100 feet from PUY(Z)12-18 outdoor units and 165 feet from PUY(Z)24-42 outdoor units when additional charge is added.

Thanks to unique design profiles and R410A refrigerant,these systems are easier to fit into any space. R410A is environmentally friendly with zero Ozone Depletion Potential (ODP).

Hot-start System

Heat pump systems use our hot-start technology to provide warmth from the beginning by ramping up fan speed as the coil warms. When you want warm air without annoying drafts, that’s what you’ll get.

Low Ambient Operation (PUY/PUZ)

The ability of these units to operate effectively in low temperatures,along with the addition of a low-ambient wind baffle accessory, allows for a space to be air-conditioned even when it is as low as 0Ëš F outside. This cooling ability is important when dealing with electronic equipment rooms, telecom substations, surveillance mechanical rooms, restaurant kitchens, fitness centers and more.

Auto Fan Speed Feature (excludes PEA model)

Choose from multiple set fan speeds or auto fan speed to ensure faster achievement of room temperature.Auto fan speed mode allows the fan to adjust its speed based on the degree of differential between set-point and room temperature.

Innovative Compressor Technology

Located in the outdoor unit, INVERTER-driven compressor systems detect subtle changes in temperature and, like a car’s cruise control,automatically adjust compressor speed unlike conventional units,which start and stop repetitively.

Special components within the compressor increase the magnetic flux and reduce its weight allowing the compressor to generate higher energy efficiencies with the best in performance than ever at low levels of sound during start-up and running.

Extra Energy Savings

Six (6) Mitsubishi Hyper-Heating INVERTER (H2i®) P-Series systems are ENER GY STAR rated and One (1) system qualifies for the Economic Stimulus Tax Credit offered as part of the American Reinvestment and Recovery Act.

Easy-clean Filters

Convenient tabs let you remove the washable filters quickly and easily for faster cleaning in the PKA, PCA and PLA indoor units.You’ll also save time and money because you won’t need to replace the filters.

Auto Cooling/Heating Changeover

In Auto Mode our systems monitor and sense when a space needs cooling or heating and automatically switch operation as needed to maintain a consistent temperature within the selected range of a single zone.

Bring In Outside Air

Ducting can be installed with minimal on-site work to bring in outside air for PCA, PLA and PEA/D indoor units, creating a healthier indoor environment.