Mitsubishi H2i PEAD-A30AA4 & PUZ-HA30NHA4 Commercial Ceiling Ducted Heat Pump 16.5 SEER - 30,000 BTU (2.5 Ton)

Mitsubishi PEAD-A30AA4 & PUZ-HA30NHA4 16.5 SEER Hyper Heat 2.5 Ton  Ceiling Ducted Heating / Air Conditioning System 30,000 BTU

The Solution is Clear

• Cool only the areas you want and not the areas where you are not
• Individual zoning at the push of a button, putting you in total comfort control
• Less then 5% cooling loss occurs in insulated refrigerant lines versus up to 40% through ducts
• Requiring just a 3 to 4" diameter hole in the outside wall means less mess, better home aesthetics, and improved security, unlike a window unit
• Mr. Slim models mount high on the wall so they don't disturb your view
• Mitsubishi units add value to your home and are more efficient than old window units, saving you money

Superior Operation

Quiet Operation

Do you hear that? No? You barely hear our systems because Mitsubishi indoor units operate with barely a whisper.

For example:

• Police siren 118 decibels
• Circular saw 107 decibels
• Vacuum cleaner 74 decibels
• Library reading room 33 decibels
• Whisper-tone voice 35 decibels
• Our Indoor Units 19 - 34 decibels (at low speed)

Did you hear that? We hope you did.

System Control in the Palm of Your Hand

Mitsubishi Electric offers a comprehensive remote controller that controls temperature, fan speed and more. Choose from four modes: COOL, HEAT, AUTO and DRY. The controller also has a 12-hour ON/OFF timer for one-button control of your personal comfort.

Warm Air, No Drafts

Our hot-start heat pump technology provides warmth from the beginning. The fan increases in speed as the coil is warmed, reducing drafts so when you want warm air, you’ll get it.

Easy to Maintain

With easily accessible filters, little or no ductwork to clean, and uncomplicated wiring connection points between the indoor and outdoor units, Mitsubishi systems rely on minimal maintenance, providing another level of comfort.

1x PUZ-A30NHA2 Commercial Outdoor Air Conditioner / Heat Pump 16.5 SEER- 30,000 BTU
(2.5 Ton)

P-Series Hyper-heating INVERTER

Bringing year-round comfort solutions to extreme climates.

Unequaled Year-round Comfort

The cooling and heating success of Mitsubishi Electric’s INVERTER-driven heat pump systems is well-documented. Our Hyper-Heating INVERTER (H2i) P-Series technology advances the process a step further with the added benefit of year-round comfort with a single system even on the coldest days of the year in most areas. The 2.5- and 3-ton wall-mounted, ceiling-suspended, ceilingcassette, and ducted indoor units connected to the H2i P-Series outdoor units are flexible enough to satisfy almost any light commercial or institutional renovation or new construction project. Rugged construction assures cold weather reliability.

Heating Performance at Low Temperatures

Our Hyper-Heating INVERTER system provides outstanding heating performance at extremely low temperatures while keeping effective energy usage at the forefront. See the impressive COP (Coefficient of Performance) values in the table the table to the right. The Mitsubishi H2i P-Series systems are able to maximize efficiency at low temperatures while providing tremendous heating output.

The Next Generation in Heat Pump Technology 

These H2i P-Series outdoor units give a new level of performance to Mitsubishi Electric P-Series models, providing the extra heat-generating power it takes to deliver comfort and consistency in extreme climates. H2i units use Mitsubishi Electric’s INVERTER-driven scroll compressor technology to achieve the desired room temperature quickly, maintaining it consistently while simultaneously conserving energy. Plus with the integration of our exclusive H2i flash technology, these H2i P-Series units recover heat energy that is normally wasted in the flash process at the outdoor coil. This process helps the H2i system overcome issues commonly associated with conventional heat pumps such as decreases in lowside pressure, refrigerant mass flow rate, and operational capacity. As a result H2i

P-Series units deliver 100 percent of rated heating capacity at 5Ëš F and 80 percent at -13Ëš F outdoor ambient temperatures (see Figure 1). (Without energy consuming electric resistance heaters.) Plus the systems use R410A environmentally friendly refrigerant. H2i P-Series heat pumps offer a variety of features designed to take the worry out of temperature control such as automatic restart in the case of power outages and automatic cool/heat changeover. Its long line-length capabilities of up to 245 ft. expand application possibilities. Sometimes cooling spaces such as computer or mechanical rooms and kitchens is necessary even when the temperature is below freezing. Air conditioning down to 0Ëš F outdoor ambient temperature is possible with the addition of a wind baffle. Whether cooling or heating, the H2i P-Series gives you the flexibility to temper extreme outdoor temperatures.

Warm Air Quickly!

At start-up, a special circuit in H2i P-Series quickly delivers refrigerant to the air-conditioning cycle, which rapidly increases the mass flow rate in the system. As a result, air at comfortable temperatures begins flowing from indoor units right away. Even at an outdoor temperature of -13Ëš F, the H2i P-Series system can discharge 100Ëš F temperature air from the indoor units. At 5Ëš F outdoor temperature and above, the discharge temperature reaches an impressive 110Ëš F with a 40Ëš F temperature rise (see Figure 2). This feature translates into a comfortable climate in all zones whether cooling or heating no matter the temperature outside.

1x PCA-A30KA PEAD-A30AA Ceiling Ducted Commercial Indoor Unit Air Handler - 30,000 BTU (2.5 Ton)

When installed, the PEA/PEAD indoor unit utilizes short duct runs, allowing for the air conditioning of adjacent spaces or extending the range of distributed capacities within a single zone with very little visual impact to the conditioned area. With features like a built-in condensate lift mechanism, adjustable static pressure, multiple fan speeds, DRY Mode, and an operating sound as low as 23 dB(A), the PEA/PEAD systems expand the number of application possibilities.

Features:

• Horizontal-ducted indoor unit features medium static pressure capability
• Thin body: 9-7/8" high
• Built-in drain mechanism for condensate removal; lifts to 27-9/16"
• Setback down to 50°F when used with MRCH1 Central Controller
• Air filter is included with indoor unit
• Quiet operation—both indoor and outdoor units
• Auto fan speed control; auto restart following a power outage
• Self-check function—integrated diagnostics
• Knockout for ventilation air
• Limited warranty: five years on parts/defects, seven years on compressors

Built-in Drain Lift Mechanism

The PEA indoor unit features a built-in drain pump that lifts condensation up to 21-11/16 inches above the drain pan and up to 27-9/16 inches for the PEAD indoor unit. The unit’s fail-safe mechanism recognizes when there is a high level in the condensate pan and shuts off the indoor fan and the outdoor unit compressor to prevent overflow.