Narrow Your Results
Categories
Floor Heating Accessories
[x]
floor heating unit, floor heater assecories
Show Only Products Qualified for up to $1,500 Tax Credit
Refine by Brands
Refine by Ton
A ton of cooling capacity is the amount of cooling that would be provided by melting a ton of ice. Thus, a central air conditioning system that is rated as a 2-ton system would provide the same cooling as melting two tons of ice per day (24-hour period).
Refine by Seasonal Energy Efficiency Rating
SEER is most commonly used to measure the efficiency of a central air conditioner. The higher the SEER, the more efficient the system. SEER measures how efficiently a cooling system will operate over an entire season.
Refine by BTU (British Thermal Unit)
A BTU is the quantity of heat required to raise 1 pound of water by 1 degree Fahrenheit.
|
1" Stainless Steel Accessories Kit manifold kits come complete with one vent-and-purge assembly, one manifold end cap, and a pair of trunk isolation ball valves.
Brand: Watts Radiant
Model: 81003736
Category: Floor Heating Accessories
What's Included:
Valve Actuator This new Valve Actuator is an optional feature for mounting directly to the balancing manifold. The Valve Actuator provides on/off flow control to individual radiant circuits. This new
Brand: Watts Radiant
Model: 81001541
Category: Floor Heating Accessories
What's Included:
Onix Female BSP Swivel Fitting -Use these female Onix T20 fittings to connect Onix to Watts Radiant Stainless Steel Manifolds. Order Onix SelfTite seperately, one clamp for each fitting.
Brand: Watts Radiant
Model: 81000679
Category: Floor Heating Accessories
What's Included:
SelfTite Clamps - Pre-tensioned foe easy field installation. The chrome-vanadium spring steel maintains a constant tension on the Onix under all operating conditions. SelfTites incorporate a znic
Brand: Watts Radiant
Model: 81000523
Category: Floor Heating Accessories
What's Included:
SelfTite Clamps - Pre-tensioned foe easy field installation. The chrome-vanadium spring steel maintains a constant tension on the Onix under all operating conditions. SelfTites incorporate a znic
Brand: Watts Radiant
Model: 81000523
Category: Floor Heating Accessories
What's Included:
Adapter, SS-T20F (3/4" FBSP) x 1/2" compression.)These fittings are used to connect the 1/2" PEX tubing to Stainless Steel Manifolds. Compression nut and ring included with all compression fittings.
Brand: Watts Radiant
Model: 81005168
Category: Floor Heating Accessories
What's Included:
SelfTite Onix Repair Kit -preassembled kits for field repairs. Each repair kit includes two splices and four SelfTite clamps.
Brand: Watts Radiant
Model: 81000509
Category: Floor Heating Accessories
What's Included:
Circuit Isolation Caps are used to "seal off" unused circuits on the manifolds. They can be used to convert 8 manifold to M7 manifold. Nickel-plated brass for corrosion resistance. Sold individually.
Brand: Watts Radiant
Model: 81005479
Category: Floor Heating Accessories
What's Included:
The Programmable FloorStat is both elegant and intelligent. It accepts programming for three set-points: Comfort, Economy (set-back), and Vacation. Features include a floor sensor that directly
Brand: Watts Radiant
Model: 81002908
Category: Floor Heating Accessories
What's Included:
WarmWire strap is used to hold WarmWire in place at the desired spacing. Anchor the strap at 3-4-ft. intervals across the floor. Cut using ordinary tin snips. Order one 25-ft.-long coil per 40-50 sq.
Brand: Watts Radiant
Model: 81008890
Category: Floor Heating Accessories
What's Included:
1" Manifold Couplings are used to connect two manifold pairs. For example, an M-4 can be connected to an M-3 using the coupler to make an M-7. Nickel-plated brass for corrosion resistance. Sold
Brand: Watts Radiant
Model: 81001988
Category: Floor Heating Accessories
What's Included:
Part #: 14005 Groove Tube, Groove Tube Silicone Heat Transfer Adhesive.
Brand: Viega
Model: 14005
Category: Floor Heating Accessories
What's Included:
|
